Technical drawings
JJ X-ray Products
Explore our innovative products and technologies
JJ X-ray offers a wide range of spectacular and efficient components and solutions, where cutting-edge technology meets precision. Elevate your research with our advanced solutions, designed to unlock new possibilities in scientific discovery. Welcome to the forefront of innovation.
Search products
IB-C22-HV
The IB-C22-HV slit derives from the classic JJ X-Ray slit, IB-C30-HV, where space requires a smaller and more compact slit.
The aperture is defined by four independently movable and highly polished tungsten carbide blades. These blades are controlled by a high precision guiding rail system and stepping motors.
The blades can be installed in two configurations: Either providing a curved surface of a 16 mm radius of or providing a knife-edge slope at 0.5 degrees. The standard blades are polished to obtain a roughness better than 25 nm RMS.
In its basic configuration, the IB-C22-HV slit is delivered with a flange-opening and tightening bolts to allow connection with KF-40 flanges.
For a better resolution, please see the similar IB-C30-HV.
Categories:
Technical Specifications
Aperture size
Maximum: 22 mm x 22 mm
Minimum: Full overlap
Resolution
2 micron per full step
Repeatability
< 1 micron
Accuracy
± 2 microns (over 3 mm)
Vacuum
O-ring sealed, high vacuum 10-5 mbar, low outgassing materials
Standard blades
2 mm thick tungsten carbide blades which can be mounted either with a 0.5 degrees knife-edge or an R16 radius edge
Limit switches (end-of-travel)
Included as standard on all motions
Guiding
High precision internal rails and carriages
Electrical connections
Limit switches coupled to 2 motor connectors (SUB-D 15 pins male)
Motors
2-phase stepping motors
Mechanical dimensions
153 mm x 153 mm x 64 mm
95 mm x 95 mm x 60 mm (housing only)
Mechanical connections
M5-threaded holes on the sides, as shown on the drawing. KF-40 flange connections are provided on the body of both sides of the slit
Weight
≈ 2.2 kg
Outer surface
Anodized aluminum in color nature
Common options
Blades: Other blade shapes and materials
Motors: Custom high-resolution stepping, including IMS motors
Encoders: Back-axle rotary encoders (absolute or incremental)
Adaptors: Other KF(NW) flanges or CF flanges
Special preparation for enabling vacuum <10-6 mbar
Internal wiring of Kapton or wiring with Teflon insulation
Custom connectors
