AT-F7-HV (Flanged ESRF)

The AT-F7-HV slit is an enhanced version of the original ESRF slit (AT-F7-AIR) which was designed for application in air or inside a larger vacuum chamber. We extended the ESRF design to also allow for connectors via vacuum flanges.

The characteristics of this system are the same as for the AT-F7-AIR slit: The compact size, the blade control (where one motor defines the aperture size and another determines the position of the aperture) and the sub-micron resolution. The slit is operated with in-vacuum motors.

A special feature of the AT-F7-HV and AT-F7-AIR slit systems are their flexible positioning of their 7mmx7mm aperture due to a total translation travel range of 14 mm.

Key Facts of AT-F7-HV
Aperture size Maximum: 7 mm x 7 mm
Minimum: Full overlap
Resolution Aperture: 0.813 micron per full step
Translation: 0.322 micron per full step
Accuracy ± 3 micron (over 3 mm)
Vacuum O-ring sealed, high vacuum 10-5 mbar, low outgassing materials
Mechanical dimension 128 mm x 128 mm x 54 mm
Standard blades 2 mm thick tungsten carbide blades with a 2 degrees knife-edge profile
Common options Blade options: 4, 5 or 10 mm, other blade materials
Connectors: Other KF- and CF-flanges possible
Special preparation for enabling vacuum <10-6 mbar        Internal wiring of Kapton or wiring with Teflon insulation

For further product information, you can download technical specifications, technical drawings, wiring and connector possibilities, manuals and 3D files below.